104
are set to the image settings of “Scene file is not applied”.
Image Quality 3
：
Scene3
（
Scene file 3
）：
Images are set to the image settings of “Scene file 3” at
the designated time in the schedule. When the designated time for the schedule finishes, images
are set to the image settings of “Scene file is not applied”.
Image Quality 4
：
Scene4
（
Scene file 4
）：
Images are set to the image settings of “Scene file 1” at
the designated time in the schedule. When the designated time for the schedule finishes, images
are set to the image settings of “Scene file is not applied”.
SFTP periodic image transmission
：
SFTP periodic image transmission will be performed at the
designated time in the schedule.
E-mail permission:
While the schedule is set, e-mail notification is sent when alarm is input.
Position refresh
：
The camera position will be refreshed at the designated time in the schedule.
1-64
：
The camera will move to the selected position from the preset position at the designated time
in the schedule.
<Automatic schedule> Daytime: Image Quality 1 / Night: Image Quality 2:
At sunrise, the image
quality is set to “Scene file 1”, and at sunset, the image quality is set to “Scene file 2”. Only schedule
1 can be selected. This cannot be selected if the sunrise/sunset times have not been set. For the
setting procedure, see “How to change the image quality based on the time of sunrise/sunset”.
Reboot:
The camera reboots at the scheduled time. Can only be selected with Schedule 8.
Note
• Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page (“Configure the
settings relating to the user authentication [User auth.]”) and “Off” for “Host auth.” on the “Host
auth.” page (“Configure the settings relating to the host authentication [Host auth.]”) to validate
“Access permission”.
• When selecting “Recording to SD (Recording stream)”, select “Stream(1)”, “Stream(2)”,“Stream(3)”,
or “Stream(4)” for “Recording format” on the [SD memory card] tab and select “Schedule” for “Save
trigger”. ([Save trigger]).
• Schedule 1 “<Automatic schedule> Daytime: Image Quality 1/ Night: Image Quality 2” and
Schedules 2 to 8 “Image Quality 1: Scene 1 (Scene file 1)”, “Image Quality 2: Scene 2 (Scene file 2)”,
“Image Quality 3: Scene 3 (Scene file 3)”, and “Image Quality 4: Scene 4 (Scene file 4)” cannot be
selected at the same time.
2. Select the checkbox for the day of the week to set the schedule in “Schedule”.
Note
• If “<Auto Schedule> Daytime: Image Quality 1/ Night: Image Quality 2” is selected in Schedule 1,
the time zone setting will be disabled.
3. To specify the time, click [
▼
] and set the time. If you do not want to set the time period, select “24h”.
Note
• If “<Auto Schedule> Daytime: Image Quality 1/ Night: Image Quality 2” is selected in Schedule 1,
the time zone setting will be disabled.
4. Click the [Set] button after completing the settings.
→
The setting details are displayed at the bottom of the screen.
