manualshive.com logo in svg

Panasonic Workio DP-C401, Руководство по обслуживанию

Panasonic Workio DP-C401 - компактное печатное устройство с быстрыми скоростями печати и высоким качеством. Здесь вы можете скачать бесплатно руководство пользователя с подробными спецификациями продукта. Не забудьте скачать его с manualshive.com.

Поделиться
Скачать
background image

3-50

Chapter 3 Troubleshooting

009-342  2ND BTR CONTACT FAILURE

Description  

The CONTACT operation cannot be performed

within the specified time after the 2ND BTR MOTOR was
turned On.

BSD on : CH9.24A CH9.31A

Procedure

Run 

DC330

 [009-200].

Open the LEFT COVER, and turn the 2ND BTR RETRACT
SENSOR On/Off with paper.
Is the display switched between H and L?

Y

N

Repair the 2ND BTR RETRACT SENSOR using Generic
Rermeable SEnsor Failure FIP.  (PL2.9)

Close the LEFT COVER and run 

DC330

 [009-051] (Notes) and

DC330

 [009-052] (Notes) alternatively.

Was the operating sound of the 2ND BTR RETRACT MOTOR
audible?

Y

N

Is +24 VDC measured between the I/F PWB J533-B8 (+)
and GND (-)? 
 

Y

N

Check the +24 VDC circuit to the I/F PWB J533-B8
by referring to Chapter 4 Wiring Data.  
(WN4.3.13 +24 VDC-1) (WN4.3.14 +24 VDC-2)
(WN4.3.15 +24 VDC-3) (WN4.3.16 +24 VDC-4)

Check the wire between the I/F PWB J533 and the 2ND
RETRACT MOTOR J216 for an open circuit and poor
contact.

Is the open circuit or poor contact found?

Y

N

Replace the 2ND BTR RETRACT MOTOR.  (PL2.9)
Replace the MCU PWB.  (PL13.1)
If the problem persists, replace the I/F PWB.  (PL9.1)

Repair the open circuit or poor contact.

Check the mechanical connection between the MOTOR and the
Shaft and check the Sensor Actuator.  If no problems are found,
replace the MCU PWB.  (PL13.1)

009-343  2ND BTR RETRACT FAILURE

Description  

Retraction cannot be performed within the 

specified time after the 2ND BTR MOTOR was turned On.

BSD on : CH9.24A CH9.31D

Procedure

Run 

DC330

 [009-200].

Open the LEFT COVER, and turn the 2ND BTR RETRACT
SENSOR On/Off with paper.
Is the display switched between H and L?

Y

N

Repair the 2ND BTR RETRACT SENSOR using Generic
Rermeable Sensor Failure FIP.  (PL2.9)

Close the LEFT COVER and run 

DC330

 [009-051] (Notes) and

DC330

 [009-052] (Notes) alternatively.

Was the operating sound of the 2ND BTR RETRACT MOTOR
audible?

Y

N

Is +24 VDC measured between the I/F PWB J533-B8 (+)
and GND (-)? 
 

Y

N

Check the +24 VDC circuit to the I/F PWB J533-B8
by referring to Chapter 4 Wiring Data.  
(WN4.3.13 +24 VDC-1) (WN4.3.14 +24 VDC-2)
(WN4.3.15 +24 VDC-3) (WN4.3.16 +24 VDC-4)

Check the wire between the I/F PWB J533 and the 2ND
RETRACT MOTOR J216 for an open circuit and poor
contact.
Is the open circuit or poor contact found?

Y

N

Replace the 2ND BTR RETRACT MOTOR.  (PL2.9)
Replace the MCU PWB.  (PL13.1)
If the problem persists, replace the I/F PWB.  (PL9.1)

Repair the open circuit or poor contact.

Check the mechanical connection between the MOTOR and the
Shaft and check the Sensor Actuator.  If no problems are found,
replace the MCU PWB.  (PL13.1)

009-348  1ST BTR CONTACT FAILURE

Description  

The 1ST BTR RETRACT SENSOR does not

detect H within the specified time after the 1ST BTR
RETRACT MOTOR was turned On (CONTACT operation has
begun).

For the DC330 that have "Notes" in the following 
FIP, check the machine status before selecting and 
executing the appropriate DC330.
If the Diag with On signals is executed to the part 
that is On, the communication link between the PSW 
and the Main Unit may be broken.
In addition, the Diagnostics button indicated in 
"Notes" is set to be executed after the Chain-Link 
No. is selected.

For the DC330 that have "Notes" in the following 
FIP, check the machine status before selecting and 
executing the appropriate DC330.
If the Diag with On signals is executed to the part 
that is On, the communication link between the PSW 
and the Main Unit may be broken.
In addition, the Diagnostics button indicated in 
"Notes" is set to be executed after the Chain-Link 
No. is selected.

For the DC330 that have "Notes" in the following 
FIP, check the machine status before selecting and 
executing the appropriate DC330.
If the Diag with On signals is executed to the part 
that is On, the communication link between the PSW 
and the Main Unit may be broken.
In addition, the Diagnostics button indicated in 
"Notes" is set to be executed after the Chain-Link 
No. is selected.

Содержание Workio DP-C401





































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Workio DP-C401

Xerox 5700 Series Manual preview
5700 Series
Бренд: Xerox Страницы: 25
Olivetti PGL 12EN Operator'S Manual preview
PGL 12EN
Бренд: Olivetti Страницы: 139
U-Line H-8093 Manual preview
H-8093
Бренд: U-Line Страницы: 33
Konica Minolta bizhub C227 Installation Manual preview
bizhub C227
Бренд: Konica Minolta Страницы: 12
Output Technology EuroLine Series Operator'S Manual preview
EuroLine Series
Бренд: Output Technology Страницы: 73
oti OCT Service Manual preview
OCT
Бренд: oti Страницы: 33
Gestetner C7006dw Printer Reference preview
C7006dw
Бренд: Gestetner Страницы: 144
Epson L220 Service Manual preview
L220
Бренд: Epson Страницы: 78
Epson L220 User Manual preview
L220
Бренд: Epson Страницы: 174
Sunso WTP-200 v3 User Manual preview
WTP-200 v3
Бренд: Sunso Страницы: 13
Kodak 5500 - EASYSHARE All-in-One Color Inkjet Start Here Manual preview
5500 - EASYSHARE All-in-One Color Inkjet
Бренд: Kodak Страницы: 32
Kodak dryview 8300 Service Manual preview
dryview 8300
Бренд: Kodak Страницы: 332
DNP DP-QW410 User Manual preview
DP-QW410
Бренд: DNP Страницы: 32
AnaJet Ricoh 3000 Quick Installation Manual preview
Ricoh 3000
Бренд: AnaJet Страницы: 6
Kyocera TASKalfa 181 Installation Manual preview
TASKalfa 181
Бренд: Kyocera Страницы: 20
Xerox WC7525 Finisher Install Manual preview
WC7525
Бренд: Xerox Страницы: 8
IBM Deskstar Deskstar 3 Quick Installation Manual preview
Deskstar Deskstar 3
Бренд: IBM Страницы: 2
Lexmark Photo Jetprinter 5770 User Manual preview
Photo Jetprinter 5770
Бренд: Lexmark Страницы: 96

Бренды по названию

Популярные бренды

Загрузить еще бренды