Panasonic KX-TD500, Справочное руководство системы

Страница: 1104 / 1574

10-I-12
Description of Assigning Items
Up to 36 routing patterns can be programmed in this table.
This table is referenced by the system to identify the trunk route, when an extension user made a tie call
by dialing the feature number for “TIE Trunk Access” or “Other PBX Extension number”.
A routing pattern appropriate for each call is decided by the first three digits (except tie trunk access code)
of the dialed number.
Code Assigns the leading one, two or three digits of the numbers for TIE calls.
Used to determine which trunk group is used for a TIE call.
Delete Digit Assigns the number of digits to be deleted from the dialed digits.
Insert Dial Assigns dialing number to be added to the dialed digits.
Trunk Group Hunt Sequence
(01 to 05)
Determines the trunk group hunt sequence to be used when placing a TIE
call. The sequence is used by both tenants but trunk group will be
skipped if it does not belong to the same tenant as the caller.
Conditions
Pressing the NEXT key changes this screen as follows:
TIE Line
Routing Table
(1/3)
TIE Line
Routing Table
(2/3)
TIE Line
Routing Table
(3/3)
Function
The following functions appear on the function line of this setting screen.
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys
are available in this setting screen. For operation, refer to Section 8-I “Operation
of Function Keys”.
1 COMMON 2 3 4 5 6 HRD CPY 7 8