Panasonic KX-TD500, Справочное руководство системы

Страница: 1319 / 1574

13-C-7
2.00 PF (Programmable Feature)
Button Assignment
2.01 PF Button Assignment for
Analog PITS
Assigning various functions to the PF buttons of
an individual PITS telephone and the DSS
Console is explained below.
Result Operation Comment/Note
To enter into the programming
mode
1. Set the MEMORY switch at
the rear of the PITS to
PROGRAM.
• With DPITS, press the
PROGRAM button.
2. Press a PF button.
• This display is called “Initial
display for PITS station
programming mode”.
• If the programming data of your
PITS has already been
accessed by another
administration device, the
following message appears on
the display.
Already Accessed
• If the END button is pressed
while programming, the above
message appears on the
display again.
• If nothing is stored, “Not
Stored” appears.
• Stored data as one touch
dialing.
• To scroll,
use the or button.
• “P” means the PF button of the
PITS. If the PF button on the
DSS console associated with
PITS is pressed, “C” appears
instead of “P”.
• PF button number.
• If nothing is entered within one
minute after pressing a PF
button, “Initial display for PITS
station programming mode” is
displayed again.
• The following message
appears on the display:
PITS-PGM No.?
• The MEMORY button indicator
lights red.
• Previously stored data appears
on the display.
<Example>
If preset to an one touch
dialing button
M01/P: 9-1-201-123-
• The MEMORY button indicator
light goes out.
Continued
SET• • PROGRAM
MEMORY
The explanation of the message display only
applies to a PITS provided with a display.