Panasonic KX-TD500, Справочное руководство системы

Страница: 1136 / 1574

11-C-10
Item
Number
Input Value Assigning Items
Continued
12
13
14
15
16
17
Print Traffic
Start Time of Traffic
Measurement
Start Time of Test
Remote Directory Number
Remote Alarm
Destination Address
Y : print traffic
N : do not print traffic
XX: XXX
01 to 12: hour
00 to 59: minute
A or P : a.m. or p.m.
XX: XXX
01 to 12: hour
00 to 59: minute
A or P : a.m./p.m.
0 : none
DN XXXX (XXXX: three or four numeric digits)
: Floating Directory Number
Y : Remote Alarm enabled
N : Remote Alarm disabled
Maximum 26 numeric digits
: telephone (modem) number of the destination for
Remote Alarm
CLR
Conditions
Item
Number
02
15
16, 17
SMDR
Remote Directory
Number
Remote Alarm/
Destination Address
If set to “N”, the following items cannot be programmed:
“Operation (OPR)”, (Index Number 2)
Page Length
Skip Perf.
Outgoing Duration Log
Incoming Duration Log
Attendant Duration
Special Carrier Name
Print Secret Dial
Print Error Log
Print Programming
Print Traffic
To assign this item, RMT card is necessary,
Impossible to program if “12” (RMT card) is not assigned in the “Slot
Assignment (SLA)”. If Remote Alarm is set to “N”, Destination Address
cannot be programmed.
For further description of assigning items, refer to Section 10-D-1.02 “Operation
(2/3)”.
: clearing function is effective
for the item