manualshive.com logo in svg

Panasonic KX-TD500, Справочное руководство системы

Поделиться
Скачать
Panasonic KX-TD500 Скачать руководство пользователя страница 534

11.00 Intercom Off-Hook Call

Announcement (OHCA)

Description

During a conversation using the handset by PITS
telephone KX-T7235, KX-T7130, KX-T123235 or
KX-T123230D, the extension user can receive
another call from Extension or from Attendant
Console.

OHCA works under the following conditions:

APITS and DPITS

•  Basic shelf, expansion shelf 1, 2 have

fifteen OHCA path which are connected
each other.

APITS

•  To activate this function by PLC or HLC

card, OHCA card (KX-T96136) is needed.

DPITS

•  To activate this function, TSW Digital OHCA

card is needed.

DLC and DHLC card with DPITS

•  A DLC card allows 8 DPITS telephones can

be called with the OHCA feature at the
same time.

DHLC card with APITS

•  A DHLC card allows one APITS telephone

can be called with the OHCA feature at the
same time.

Programming

System Programming

Reference

VT          Dumb

“Configuration-Slot Assignment”
“Extension-Station (1/4)”,

OHCA Circuit

“Extension-Station (2/4, 3/4)”,

DN Key Type

11-C-2.00
11-C-24.00

11-C-26.00

10-C-2.00
10-G-1.01

10-G-1.02
10-G-1.03

Conditions

OHCA can be received only with the PITS 
KX-T7235, KX-T7130, KX-T123235, and
KX-T123230D telephones.

OHCA does not work if the called extension is
under one of the following conditions:

• The OHCA button is not idle
• Talking in the speaker phone mode
•  Setting BSS/OHCA Deny
• Setting Do Not Disturb
• Using headset

Operation

Answering OHCA

You are having a conversation using the handset.

1.  When the indicator on the OHCA

button lights in green, you hear
two beeps.  At the same time the
microphone and the speaker for
hands-free turn on automatically.
Talk to the caller over the
speaker.

Finishing the original call during a conversation by
OHCA

You are having conversations with the original

caller and the OHCA caller.

1.  Replace the handset.

•  The original call is finished.  The

OHCA call changes to hands-
free mode.

2.  After finishing conversation, press

the SP-PHONE button.

4-G-18

Содержание KX-TD500







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды