Panasonic KX-TD500, Справочное руководство системы

Страница: 1205 / 1574

11-C-79
(9) /# Allow Mode
Used to determine if the dialed “ ” and/or “#” in the leading 3 digits will be
checked by Toll Restriction. This assignment is required for certain central
offices (CO) to prevent toll fraud. Some CO ignore the user-dialed “
”
and/or “#”. If your CO is such a type, select “N” (Restricted).
(Parameters)
Y : Not restricted
N : Restricted (default)
(10) Message Waiting Lamp Off-Control — Voice Mail
Used to determine whether the system turns off the Message Waiting lamp
or the VPS does when the VPS answers the callback from the message
receiver.
(Parameters)
1. Normal Mode (default)
The system turns off the Message Waiting lamp.
2. Voice Mail Mode
The VPS turns off the Message Waiting lamp.
3. The system and VPS turn off the Message Waiting lamp.
(11) µ – A law (E-1 only)
Used to select the appropriate PCM (Pulse Code Modulation) conversion
mode.
This setting is valid only when E-1 trunk card is installed to the system.
(Parameters)
1.
µ-law
2. A-law (default)
(12) SLT Transfer Operation
Used to select the SLT transfer operation
mode.
(Parameters)
1. Transfer operation mode 1. (default)
SLT cannot transfer a call to CO.
2. Transfer operation mode 2.
SLT can transfer a call to CO with dialing the feature number.
3. Transfer operation mode 3.
SLT can transfer a call to CO without dialing the feature number.
(Note)
When “3” is selected, the conference feature is disabled.
(13) Ringback Tone While Transfer
Used to determine whether the system sends the ringback tone while the
call is transferred.
(Parameters)
Y : The system sends the ringback tone while the call is transferred.
N : The system does not send the ringback tone while the call is transferred.
(default)