Panasonic KX-TD500, Справочное руководство системы

Страница: 803 / 1574

Operation
Recording OGM
1. Press an idle LOOP key.
• The SRC indicator lights and
dial tone sounds.
2. Dial the feature number for “OGM
Record” (Default: 67) and the
resource number (1 to 4) in
succession.
(Resource number)
1 : OGM1 for UCD
2 : OGM2 for UCD
3 : OGM for DISA
4 : OGM for W-UP (Wake-up)
• The following message appears
on the screen and confirmation
tone sounds.
Message: xxxxxxxx recording: 00 sec
UCD-OGM1 or
UCD-OGM2 or
DISA-OGM or
Wake Up OGM
3. Begin your message.
4. Dial “#” to conclude recording.
• Playback starts automatically
through the handset or headset,
the following message appears
on the screen.
Message: xxxxxxxx playing: 00 sec
• After playback finishes, the
SRC indicator remains lit, and
no tone sounds.
(Supplement)
In step 3 if 30 seconds is over, recording is
terminated and playback starts automatically.
Accordingly, it is not necessary to execute step 4
afterward.
In step 3, if you wish to change the message
during recording, you can start recording again by
dialing “
*
”.
In Step 4, if you wish to interrupt and finish
playback, dial “#”.
LOOP
Playing back OGM
1. Press an idle LOOP key.
• The SRC indicator lights and
dial tone sounds.
2. Dial the feature number for
“OGM Playback” (Default: 68)
and a number below in
succession.
(Resource number)
1 : OGM1 for UCD
2 : OGM2 for UCD
3 : OGM for DISA
4 : OGM for W-UP (Wake-up)
(“
*
” and DISA No.)
*
1 : selects Card 1
*
2 : selects Card 2
*
3 : selects Card 3
*
4 : selects Card 4
• The following message
appears on the screen. After
confirmation tone sounds,
playback starts.
Message: xxxxxxxx playing: 00 sec
UCD-OGM1 or
UCD-OGM2 or
DISA-OGM or
Wake Up OGM
• After playback finishes, the
SRC indicator remains lit, and
no tone sounds.
(Supplement)
In step 2, if you wish to interrupt and finish
playback, press “#”.
During playback you can start playback again
from the beginning by dialing “
*
”.
LOOP
6-J-21