Panasonic KX-TD500, Справочное руководство системы

Страница: 1314 / 1574

13-C-2
To enter into the programming
mode
1. Set the MEMORY switch at
the rear of the PITS to
PROGRAM.
• With DPITS, press the
PROGRAM button.
2. Press the appropriate DN
button.
The explanation of the message display applies
only to a PITS with the display.
• This status is called “initial
display for PITS station
programming mode”.
• If the programming data of your
PITS has already been
accessed by another
administration device, the
following message appears on
the display.
Already Accessed
• If the END button is pressed
while programming, return to
the “initial display for PITS
station programming mode”.
• When the following messages
appears on the display,
changing the assigned feature
is impossible in this mode, and
can be changed only by the
system programming.
<Example>
PDN:DN 1011
(Primary Directory Number)
<Example>
SDN:DN 1012
(Secondary Directory Number)
<Example>
PRV-CO:T20201
(Private CO)
<Example>
(Off-Hook Call Announcement)
<Example>
(UCD Log in)
<Example>
(Local Alarm)
Result
Operation
Comment/Note
Continued
1.00 DN (Directory Number)
Button Assignment
Assigning various features to the DN buttons of
individual PITS telephone is explained here.
• The following message
appears on the display:
PITS-PGM No.?
• The MEMORY button indicator
lights red.
• Previously stored data appears
on the display:
<Example>
DSS(DN):1011
• The MEMORY button indicator
light goes out and the
associated DN button indicator
lights in red.
• If nothing is entered within one
minute after pressing the DN
button, “Initial display for
PITS station programming
mode” is restored.
SET• • PROGRAM
MEMORY
OHCA on DN
UCD Log
Local Alarm