Panasonic KX-TD500, Справочное руководство системы

Страница: 1250 / 1574

11-C-124
Rate
T A R
Mode (SH/AT/BT)
CR
↵
Input Value
Up to eight digits numeric characters
including “.” (decimal point) can be entered.
Up to two characters or a sign.
[Note]
Enclose the input value with double
quotation marks.
Assigning Items
Item Number
58.02 Charge Rate (RAT)
Description
Used to assign the charge rate and denomination of an outgoing CO call.
(Password Level : Two or higher)
Input Format
1
2
Item
Number
Item Number Input Values
Denomination
Conditions
•
The KX-TD500 can display a charge for calls maximun 8 digits (or 7 digits when included a decimal
point) on a PITS and SMDR. So, if the value exceeded this limit, the KX-TD500 display only the last 7 or
8 figures of a charge for calls.
•
The “Rate” item can also be assigned by an extension user in the PITS station programming mode.
Refer to Section 13-C-9.11 “Setting Charge Rate”.
Supplement
The KX-TD500 informs the charge for calls that is calculated by multiplying the value of “Rate” and a
number of pay-tone that is received from CO through a PCOT card.
For example, when you programmed “Rate” is 0.12 and “Denomination” is “DM”, and the KX-TD500
received a pay-tone 10 times from CO line, the charge for the call is shown “1.2 DM” on the PITS of
Charge Manager and SMDR.