Setup Menu: Menu List
101
Setup Menu
PORT9
REC:
Becomes active in the REC or REC PAUSE state.
PLAY:
Becomes active in the PLAY or REC state.
FF:
Becomes active in the FF state.
REW:
Becomes active in the REW state.
STOP:
Becomes active in the STOP state.
PAUSE:
Becomes active in the STILL or REC PAUSE state.
SHTL:
Becomes active in the SHTL state.
SHTL 0.0:
Becomes active when the speed is the 0.0 state in SHTL.
NO CARD:
Becomes active in the state of all P2 memory card slots and microP2 memory card slots con-
taining no cards. (This is active in USB DEVICE mode.)
REMOTE:
Same as the REMOTE lamp.
ERROR0:
ERROR1:
Becomes active when an error or warning occurs. Becomes active for 3 seconds when
BUSY or warning.
STATUS 0,1= (0,0): No error
(1,0): AUTO OFF
(1,1): BUSY, warning
TC INPUT 0:
TC INPUT 1:
Becomes active in accordance with the time code generator selection state.
INPUT0,1=
(0,0): External SLTC
(0,1): External LTC
(1,0): Undefined
(1,1): INT
AUDIO INPUT UNITY:
Becomes active when all of the audio input channels are “UNITY.”
PANEL STOP:
Becomes active when the [STOP]
button is in the pressed state.
REC INHIBIT:
Becomes active when all of the recording target P2 cards are in the write protected state.
KEY INHIBIT:
Becomes active when front panel operation is prohibited.
PORT10
The settings are the same as PORT9. The factory default setting is
FF
.
PORT11
The settings are the same as PORT9. The factory default setting is
REW
.
PORT12
The settings are the same as PORT9. The factory default setting is
REC
.
PORT13
The settings are the same as PORT9. The factory default setting is
REMOTE
.
PORT14
The settings are the same as PORT9. The factory default setting is
SHTL 0.0
.
Item
Settings and brief function description
FREQ indications
59.94Hz
50Hz
