Main Mode: Using the Unit Connected to a Network
63
M
a
in M
ode
A folder selected from an FTP server on the network can
be written back to an SD memory card.
1
Display the FTP EXPLORE screen.
2
The folder screen of the FTP server appears.
The folders on the set server are displayed. Use the cursor
buttons to select the transfer source folder.
3
Press the [MENU] button.
4
Use the cursor buttons to align the cursor with the
“IMPORT” (
➝
page 83) menu item and press the
“SET” button.
Press “OK” in the SD IMPORT confirmation dialog box that
appears to start writing back the data to the SD memory
card.
Note:
• To stop importing, press the [SET] button, align the cursor
with “YES” in the “CANCEL” confirmation message, and
press the [SET] button. Partially imported files in the SD
memory card are deleted, but successfully imported files re-
main.
• After importing starts, disconnection errors will no longer be
detected.
Use the above procedure to stop an import operation that
has stalled.
• Writing back may take a long time depending on factors
such as the number of files, file sizes, and network condi-
tions.
• Any files with the same path names on the SD memory card
will be overwritten without any warning message being dis-
played. However, if the path names are the same but the
types differ (folder and file), an error is generated.
• To prevent inadvertent overwriting, format the SD memory
card before importing whenever possible.
• To use SSH, the FTP server must be SSH compliant.
• Setting SSH to “ENABLE” will reduce the transfer speed.
When importing is completed, “COPY COMPLETED!” ap-
pears.
Writing back from an FTP server
(import)
