Control Reference Guide: I/O Connectors
19
Cont
rol
Re
fe
ren
ce Gu
id
e
15.
PARALLEL REMOTE connector
This is a 15-pin parallel remote connector.
The assignment for each port can be selected in the “PAR-
ALLEL PORT PORT1-7 PORT 9-14” (
➝
page 100 and
page 101) menu item.
Note:
• Supply TTL-level, active LOW electrical signals with an edge
of 100 msec or higher as input signals.
• A maximum open collector and sink current of 6 mA is out-
put as an output signal.
• Use a shielded cable to connect to this connector.
16.
Fan
This fan is for cooling the unit. Install the unit where the
ventilation holes will not be blocked.
Note:
If the fan is stopped while the power is on, the “FAN
STOPPED” warning is displayed. The unit will operate even if
the fan is stopped. However, please stop using the unit imme-
diately.
Pin
No.
Port Name
Function
1
PORT1
Command input port 1
2
PORT2
Command input port 2
3
PORT3
Command input port 3
4
PORT4
Command input port 4
5
PORT5
Command input port 5
6
PORT6
Command input port 6
7
PORT7
Command input port 7
8
+5 V Output
(+180 mA max.)
9
PORT9
Status output port 1
10
PORT10
Status output port 2
11
PORT11
Status output port 3
12
PORT12
Status output port 4
13
PORT13
Status output port 5
14
PORT14
Status output port 6
15
GND
GND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
