User’s Manual
62
Appendix C
─
WebGuard
WebGuard allows you to access a remote DVR, monitor live video images and search recorded video using
Internet Explorer web browser anytime from virtually anywhere.
Computer system requirements for using the WebGuard program are:
Operating System: Microsoft
®
Windows
®
2000, Microsoft
®
Windows
®
XP or Microsoft
®
Windows
®
Vista
CPU: Intel Pentium III (Celeron) 600MHz or faster
RAM: 128MB or higher
VGA: 8MB or higher (1024x768, 24bpp or higher)
Internet Explorer: Version 6.0 or later
Start Internet Explorer on your local PC. You can run the WebGuard program by entering the following
information in the address field.
–
“http://IP address:port number” (The DVR IP address and the WebGuard port number (default: 12088)
set in the Network setup screen (General tab))
–
Or, “http://DVRNS server address/DVR name” (The DVRNS server address and the DVR name registered
on the DVRNS server)
–
Or, “http://www.dvronline.net” (Entering the DVR IP address or the DVR name will be required when
logging in)
NOTE: WebGuard only works with Microsoft Internet Explorer and will NOT work with other browsers.
Select between the
WEBWATCH
(Web monitoring) and
WEBSEARCH
(Web search) modes and enter the appropriate
port number of the program. Entering
ID
and
PASSWORD
and clicking the [
LOGIN]
button logs in using the selected
mode. Selecting
Save ID
saves the ID you entered.
You will need to enter the DVR IP address in the
DVR ADDRESS
field when running the WebGuard
program by entering http://www.dvronline.net. Selecting the
Use DVRNS
option allows you to enter
the DVR name registered on the DVRNS server instead of the IP address. You must enter the DVRNS
server address and port number in the
SETUP
setting when selecting the
Use DVRNS
option.
NOTE: The port numbers for
WATCH
,
SEARCH
and
AUDIO
should be the same with port numbers for
Remote Watch
,
Remote Search
and
Remote Audio
set during Network setup.
NOTE: When running the updated WebGuard for the first time, Internet Explorer might occasionally
load the information of the previous version. In this case, delete the temporary internet files by
selecting Tools
Internet Options
General tab, and then run WebGuard again.
NOTE: There might be a problem that the bottom of WebGuard page is cropped due to the address
or status bars in Microsoft Internet Explorer 7.0. In this situation, it is recommended that websites
open windows without address or status bars by changing the internet setting. (Go to the Tools
Internet Options
Security tab
Click the Custom level… button
Select
Enable
for the
Allow
websites to open windows without address or status bars
option)
