User’s Manual
18
The box beside
Recorded Data – From / To
displays the time information of recorded data.
Highlighting
Clear All Data…
and pressing the button will clear all video data. You will be asked to
verify that you wish to clear all data before the DVR erases the video data.
Clear All Data…
will not clear
the System Log.
After you are finished with the Storage Screen, you can highlight
Save
and press the button to save the
changes and exit the screen. If you do not wish to save the changes, highlight
Cancel
and press the button
to exit the screen.
Recording Menu
Your DVR offers a variety of flexible recording modes. You can set it up to record all the time or to only
record events. It can be set up to continue recording once the hard disk drive is full by recording over the
oldest video, or you can set it up to alert you when the hard disk is full and stop recording.
Figure 10
─
Record menu.
General Setting (RECORD
General Tab)
Figure 11
─
General screen.
Highlighting
Recycle When Disk Full
and pressing the button toggles between On and Off. In the
Recycle mode, the DVR records over the oldest video data once all available storage space has been used.
When Recycle is turned off, the DVR stops recording once all available storage space has been used.
