Digital Video Recorder
31
Network Setup (NETWORK
Network Tab)
Figure 21
─
Network (Manual) screen.
Highlight the box beside
Type
and press the button. You can select the type of network configuration
from:
Manual
,
DHCP
and
ADSL (with PPPoE)
. Select the desired type and press the button.
Selecting
Manual
from the Type allows you to set up LAN parameters manually.
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your network
administrator.
Change the numbers by highlighting them and using the
Up
and
Down
arrow buttons to increase or decrease
the number. The factory default LAN settings are:
IP
Address:
192.168.1.129
Gateway: 192.168.1.254
Subnet
Mask:
255.255.255.0
Highlight the box beside
DNS Server
. Press the
Up
and
Down
arrow buttons to set the IP address of the
DNS server.
Highlight
Port Number Setup…
and press the button. The
Port Number Setup
screen appears.
NOTE: You will need to get the appropriate Port Numbers for each RAS and WebGuard related program
(Admin, Watch, Search and Audio) from your network administrator.
NOTE: The system restarts automatically after changing the port settings.
NOTE: Do NOT use the same port number for two different programs, otherwise, the DVR cannot
be connected with the PC running RAS or WebGuard.
CAUTION: When changing the port settings, you must change the port settings on the PC
running RAS or WebGuard as well. Refer to the RAS manual for details.
Selecting
DHCP
from the Type and highlighting
Save
button reads the current IP address of the DVR
configured by DHCP (Dynamic Host Configuration Protocol) network.
Change the numbers by highlighting them and using the Up and Down
arrow buttons to increase or decrease the number. The factory default
Port settings are:
Remote Admin:
8200
Remote Watch:
8016
Remote Search:
10019
Remote Audio:
8116
