Digital Video Recorder
29
Disk Almost Full
─
Select the percentage level of disk usage at which you want the DVR to trigger an
alert.
Disk Bad
─
Select percentage level of bad disk sectors at which you want the DVR to trigger an alert.
Disk Temperature
─
Set the temperature threshold and (ºC (Celsius)
or ºF (Fahrenheit)). If the temperature of hard disk drive exceeds the
defined threshold, the system triggers an alert.
Highlighting the box under the
Actions
heading beside each Event and pressing the button to set up
actions the DVR will take whenever it detects each system event. System events can sound the DVR’s
internal buzzer and/or notify a number of different devices.
NOTE: The Beep action cannot be set to
System
and
Panic Record
event.
NOTE: For the Notify action, the notify item you select should be enabled in the NETWORK – Mail
setup screen and the DVR should be registered in the RAS (Remote Administration System).
After you are finished with the System Screen, you can highlight
Save
and press the button to save the
changes and exit the screen. If you do not wish to save the changes, highlight
Cancel
and press the
button to exit the screen.
Network Menu
Figure 19
─
Network Menu.
General Setup (NETWORK
General Tab)
