Pace PROGRAMMABLE THERMOFLO, Руководство по эксплуатации и техническому обслуживанию

Страница: 77 / 92

72
SET-UP MODE
INTRODUCTION
In Set-Up Mode you can:
1. Install, remove or change a password.
2. Set the Temperature scale to °C or °F as desired.
3. Delete stored profiles.
Use the following procedure to enter the Set-Up mode and make any changes.
ENTERING SET-UP MODE
NOTE
If a password is currently stored in memory, “Enter Password” will be
displayed. Enter the 4 key numerical password sequence to continue.
Figure 103.
3. Release the ENTER key.
2. Press and hold the ENTER key while switching the Power
Switch to the On (“1”) position. The Digital Readout will now
display a version message and change to read Password
Needed ?
Figure 104.
1. Set the Power Switch to the Off (“0”) position.