Pace PROGRAMMABLE THERMOFLO, Руководство по эксплуатации и техническому обслуживанию

Страница: 11 / 92

6
GENERAL INFORMATION
REAR PANEL
17. POWER SWITCH - Turns system ON and OFF; controls input power to the system.
18. POWER FUSE/FUSEHOLDER -Provides overload protection for the ThermoFlo unit.
19. AC POWER RECEPTACLE - Provides AC power to the system from the outlet through power cord.
20. EARTH GROUND RECEPTACLE - Provides positive earth ground to which a ground cable can be
connected from the workpiece or work surface as part of a static control program.
21. GFI LIGHT - Illuminates Green in color when unit is powered on. Light goes off when a handpiece
ground fault, heater fault or blower fault is detected and heater operation is disabled.
22. HANDPIECE CABLE ENTRY - Hard-wired cable entry from ThermoFlo handpiece to power source.
23. HEAT WAVE CONNECTOR - Provides connection to PACE HeatWave power source to activate
optional preheat system (Heat Wave).
24. COM PORT - Future use communication port to provide RS-232 interface connection for PC (personal
computer).
Figure 2.