Pace PROGRAMMABLE THERMOFLO, Руководство по эксплуатации и техническому обслуживанию

Страница: 76 / 92

71
OPERATION
Figure 100.
Figure 102.
30. "Save Profile"is now be displayed. This is the next
storage area number which currently has no stored
profile. If you wish to store the profile under this
number, press and release the ENTER Key. If you
wish to use another profile number, enter the 2 digit
number using the numbered keys. Press and release
the ENTER Key to save and proceed to step 32.
NOTE
If you choose a number other than the next
available storage number, be careful to use
an unused number. If you enter a currently
used number by mistake, the display will ask
you if you wish to replace the currently
stored profile.
32. "Profile =" is now be displayed. The user can now
select the desired stored profile required for rework.
33. Refer to the Program Mode portion of the Operation
section of this manual for instructions on operating
the unit in Program Mode.
Figure 101.
31. "Exit Edit Mode?" is now displayed. Use the YES
Key to exit the mode. If you do not wish to exit,
press and release the NO Key and proceed to step 3
to change any parameter previously stored. In many
of the previously described scenarios, this step is
bypassed.