55
OPERATION
5. The Digital Readout will now display “Profile =“
with the current profile number. To select the profile
number you wish to use, do one of the following:
a) Press and release the STEP Key to advance to the
next higher profile number.
b) Press and release the BACK Key to advance to
the next lower profile number.
NOTE
a & b will not work if "Profile = _ _".
or
a1)Press and release the RECALL Key.
b1)A “Recall - -” message will now be displayed.
c1)Enter the desired 2 digit profile number.
d1)Press and release the ENTER Key.
Figure 65.
Figure 66.
NOTE
The Timed Mode Install Light will now be
illuminated. "Save Cur Profile?" may be
displayed on the Digital Readout if the last
profile used was not stored in memory. Press
the NO Key at this point.
Содержание PROGRAMMABLE THERMOFLO
Страница 2: ...i MANUAL NO 5050 0420 REV A...
Страница 26: ...21 QUICK START...
