otometrics Madsen ZODIAC 901, Руководство пользователя

Страница: 26 / 100

Main Menu 6. When this process has been completed, the Main Menu is loaded and
you are ready to enter your I.D. together with the I.D. of your first
patient of the day (see §3.4). NO WARM-UP TIME IS REQUIRED.
Remember to Connect
Headset! NOTE: If the headset has not been connected, the analyzer will not
continue and the following message will be displayed:
Headset not connected!
Error Messages If the self-test fails or displays a specific error, make a note of the error
message, call your Madsen Electronics distributor right away and report
exactly what was displayed (remember to state serial no. and software
version).
To Bypass Daily
Calibration If the ZODIAC 901 has been programmed to do so by the ZODICON
TM
software, it may give a warning that it has not been calibrated suffi-
ciently recently. If it has been programmed to perform Daily Calibration
automatically during power-up, it may give a message requesting that
the probe be inserted into the Precision Cavity. In either case, you may
proceed by pressing
Main Menu .
3.4 MAIN MENU
Main Menu Following power-on, or after selecting Main Menu , the screen shown in
Fig.3.2 is displayed, indicating which ear has been selected, time, date,
operator I.D., patient number or I.D., and a sub-menu.
The default ear (left or right) may be set using the ZODICON
TM
software,
and may be different from that shown in the illustration. The format of
the date may also differ from that shown if it has been modified using
ZODICON
TM
. The time and/or date setting may be altered using ZO-
DIAC 901 System Setup (see §7.2).
The following functions may be accessed from the Main Menu:
20 Operation Manual
GENERAL DESCRIPTION Chap. 3 GN Otometrics
MAIN MENU
3.4 ZODIAC 901 Middle-Ear Analyzer
Fig.3.2