otometrics Madsen ZODIAC 901, Руководство пользователя

Страница: 27 / 100

Softkey 1
·
Data from last patient tested may be erased by pressing Softkey 1 to se-
lect New Patient.
Softkey 2
·
Selecting “I.D.” by pressing Softkey 2 enables both operator and pa-
tient identification to be entered.
Softkey 3
·
Daily Calibration may be performed by pressing Softkey 3 .
Softkey 4
·
Softkey 4 enables you to “Select Default Configuration”, thus restoring
the default configuration (which may have been modified using ZODI-
CON
TM
software), and removing any changes made using Setup (§5.2).
Softkey 5
·
Softkey 5 may be used to toggle between Easy Mode and Advanced
Mode. This facility is used to configure the use of three of the Manual
Mode keys to suit the application. In Easy Mode, the three keys select
three measurement functions directly. Pressing the
Tymp. key accesses
Automatic Sweep*, the Reflex key accesses Manual Reflex*, and the
Threshold key accesses Reflex Threshold*. In Advanced Mode, press-
ing any of these keys displays a related sub-menu which invites a
further selection of tests (see §3.4.5).
These facilities are described more fully in the following sub-sections.
ZODICON™ *These are the factory default test modes. Choice of test in Easy Mode
may be altered by means of ZODICON
Ô
.
3.4.1 NEW PATIENT
Patient Counter ZODIAC 901 has a built-in automatic patient counter indicated by a
number opposite the item “Patient” in the Main Menu display. Each
time the instrument is powered on, the patient counter is reset at 1. If
preferred, the patient may be identified by name or healthcare number
(see Identification below). However, each time you finish testing a pa-
tient and wish to start a new patient, press
Main Menu to enter the
Main Menu, press Softkey 1 , New Pt. to display the “New Patient?”
sub-menu, and press
Softkey 1
again to confirm your choice.
Note that the display indicates the next number on the patient counter,
which you may then change to an alphanumeric entry, if desired, by re-
turning to the Main Menu (press
Main Menu ) and pressing Softkey 2 to
select I.D.
WARNING! NOTE! Selecting New Patient
erases all data on previous patient!
Previous Patient
Data Erased!
The selection of New Patient must be confirmed because all the data
concerning the last patient is automatically erased from the instrument’s
memory whenever you confirm selection! If a mistake has been made,
pressing
Softkey 2 from the “New Patient?” sub-menu prevents the data
from being erased.
Operation Manual 21
GN Otometrics GENERAL DESCRIPTION Chap. 3
ZODIAC 901 Middle-Ear Analyzer
MAIN MENU
3.4