otometrics Madsen ZODIAC 901, Руководство пользователя

Страница: 68 / 100

5.3.2 PRINTOUT
Four different kinds of printout may be made: screen dump, print data
on screen only, print all data, or print all new data. “All data” means all
data available for both ears, and for all tests made for that patient.
Printer
From Version 4. x , printout may be interrupted. To stop printout when in
progress, press and hold down the Printer pushbutton until Cancel ap-
pears over Softkey 4.
Softkey 4
Press Softkey 4 until printout stops.
5.3.2.1 SCREEN DUMP
Softkey 1 Pressing Softkey 1 , Screen Dump, prints ALL data and test results
shown on the screen, including the operation commands, etc., in the bot-
tom two lines of the display.
5.3.2.2 PRINT DATA
Softkey 2
Pressing
Softkey 2
, Print Data, only the data and test results for that test
are printed out, plus setup parameters not shown on the screen. This
means that, in Reflex Decay and Reflex Threshold, all curves for all fre-
quencies are printed out.
For convenience, this choice of printout is distinguished visually from
the Screen Dump by the presence of a frame printed around the test title
and ear selection (left or right). If there is no test data to print out, the
panel offering this function is blank, and
Softkey 2 has no effect.
5.3.2.3 PRINT ALL
Softkey 3
Pressing Softkey 3 , Print All, not only prints out all test data, for both
ears, for the current patient, but also the Madsen Electronics header to-
gether with your own, if it has been entered via the ZODICON™ con-
figuration program. The sequence of tests in the printout may also be
defined by means of ZODICON™.
Version 4.x Only Pressing Softkey 3 , Print All, displays a new sub-menu offerring you the
choice between printing out all data, as described in the previous para-
graph, or printing out only new data, i.e. data gathered from measure-
ments made since the last Print All.
62 Operation Manual
SUPPLEMENTARY FUNCTIONS Chap. 5 GN Otometrics
PRINTER
5.3 ZODIAC 901 Middle-Ear Analyzer