- 170 -
- 171 -
ST
AND UNIT
W
ALL UNIT
SCREEN C
ONFIG'
GRAPHIC C
ONFIG'
FRAME INS
TALL'
OPERA
TION
SENSOR C
ONFIG'
4
. Bent Adjustment
y
Bent Adjustment is for the adjustment of the angle distortions and the camera displacement.
y
The calibration for touch points is also performed at the same time.
<Bent Adjustment Window>
4
.
1
. Bent Adjustment Process
1) Configure the margins for the 4 directions; top, bottom, right, and the left.
①
. Select the left margin according to width of the screen.
②
. Select the upper margin according to height of the screen.
③
. Select the right margin according to width of the screen
④
. Select the lower margin according to height of the screen
➍
➌
➋
➊
<Setting the Screen Margins>
Caution
It is recommended to maintain the default value.
Only in case of the touch points are not accurate after Bent Adjustment,
adjust the screen margins and try Bent Adjustment again.
2)
Select the Positioning of the display orientation window.
➍
➌
➋
➊
①
.
Landscape:
Select when the monitor display is positioned on horizontal direction.
②
.
Portrait:
Select when the monitor display is positioned on vertical direction.
③
.
Landscape (Flipped):
Select when the monitor display orientation is
180
°
rotated.(horizon)
④
.
Portrait (Flipped):
Select when the monitor display orientation is rotated
270
°
(vertical).
Caution
OPE-
11701
should be configured as Landscape.
OPE-11701
Innovative e-Board of New Conception
e-Board
