Orion OPE-11701, Руководство пользователя

Страница: 21 / 97

- 38 - - 39 -
W
ALL UNIT
SCREEN C
ONFIG'
GRAPHIC C
ONFIG'
FRAME INS
TALL'
SENSOR C
ONFIG'
OPERA
TION
ST
AND UNIT
M
6
*
12
OPE-11701
Innovative e-Board of New Conception
e-Board
Connect the MAIN FRAME and Y-Axis Link with
M
6
*
12
bolts using a
5
mm allen wrench.
2
.
12
. Fix the MAIN FRAMEs of the upper and lower rows with "Y-Axis Link."
y
Fix the MAIN FRAMEs of the upper and lower rows with "Y-Axis Link" at the right side of each MAIN FRAME to be
moved together.
3
. MPDP Installation.
3
.
1
. Check the height of ADJUSTER
y Adjust the height of the
6
ADJUSTERs at the rear side of the upper MAIN FRAMEs to
15
mm or higher.
y Adjust the height of the
6
ADJUSTERs at the rear side of the lower MAIN FRAMEs to
5
mm or lower.
y MPDP panel may be damaged if you install the MPDP sets without adjusting the height of the ADJUSTERs.
y
Therefore, the height of the ADJUSTERs must be adjusted prior to installation.
Turn the ADJUSTER at the rear
bottom side of each MAIN FRAME
with an
8
mm Allen Wrench to
higher or lower it.
ADJUSTER
(M
10
*
50
)
8mm WRENCH
WARNING
• MPDP panel may be damaged if you install the MPDP sets without
adjusting the height of the ADJUSTERs. Therefore, the height of the
ADJUSTERs must be adjusted prior to installation.
Adjust the height of the
6
ADJUSTERs of the upper
MAIN FRAMEs to
15
mm
or higher.
Adjust the height of the
6
ADJUSTERs of the lower
MAIN FRAMEs to
5
mm or
lower.
15 mm or higher
5
mm or lower