- 146 -
- 147 -
ST
AND UNIT
W
ALL UNIT
SCREEN C
ONFIG'
GRAPHIC C
ONFIG'
SENSOR C
ONFIG'
OPERA
TION
FRAME INS
TALL'
10
.
9
. Connecting RS-
232
C Cable
y
Connect the RS-
232
C cable from Main Control Board to the RS-
232
C IN port of the MPDP of ID No.
6
.
y
The
6
MPDP sets must be connected by Daisy Chain method. Refer to the following diagram.
➊
Connect to the RS-
232
C IN
port of the MPDP of ID No.
6
.
10
.
10
. Connecting PC Power Control Connector
y
There is the PC power Control Connector extended from the Sensor Control Board at the rear lower part of the
Frame Right.
y
Although the extended PC power Control Connector has the same specification with USB, it must not connect
to the USB port in a PC. It must connect to the separate connector in the PC bracket.
y
The PC power Control Connector is female type to distinguish from USB cable
y
Use the enclosed USB extension cable to connect the PC power Control Connector and the port in the PC
bracket.
Main Control
Board
ID 3
ID 2
ID 5
ID 6
ID 1
ID 4
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-
232
C
Caution
• To be distinguished from normal USB cable, PC Power Control Connector is
female type. It must not be connected to USB port.
PC Power Control Extension Cable
It shares the same specification with
USB. But, it must not connect to the USB
port in a PC
PC
RS-
232
C Daisy Chain Connection
PC Power Control
Connector
➊
Connect to the designated port in
the PC bracket with the enclosed
PC Power Control Extension
Connector.
OPE-11701
Innovative e-Board of New Conception
e-Board
