- 36 -
- 37 -
W
ALL UNIT
SCREEN C
ONFIG'
GRAPHIC C
ONFIG'
FRAME INS
TALL'
SENSOR C
ONFIG'
OPERA
TION
ST
AND UNIT
2
.
10
. Check the contacting surfaces of MAIN FRAMEs
y
Check if the contacting surfaces are accurately positioned.
y
If there is improperly aligned MAIN FRAMEs, disassemble and correct the position prior to assemble again.
y
After the alignment, shake the MAIN FRAMEs to check whether they are assembled tightly.
If there is improperly aligned MAIN FRAMEs,
disassemble and correct the position prior to
assemble again.
OPE-11701
Innovative e-Board of New Conception
e-Board
Sliding Frame
Remove the screws of the supporting plate
with a
5
mm allen wrench. Then, remove the
plate completely from the MAIN FRAME.
2
.
11
. Remove the supporting plate of MAIN FRAMEs in the left and right
columns.
y
Once the supporting plate of MAIN FRAMEs in the left and right columns are removed, the Sliding Frame can
move from side to side to install the MPDP.
y
In case of fixed center column, remove the supporting plate of upper MAIN FRAMEs only. Do not remove that of
lower MAIN FRAME.
Fixed Center Column
