- 152 -
- 153 -
ST
AND UNIT
W
ALL UNIT
SCREEN C
ONFIG'
GRAPHIC C
ONFIG'
FRAME INS
TALL'
OPERA
TION
SENSOR C
ONFIG'
1
. Introduction
y
This document is an instruction manual of the touch sensors (T
3
K Series Touch Sensors) for OPE -
11701
e-board.
Caution
As there exist some special knowledge in the setup of the sensors, it is
advised that this manual be used solely by the manufacturer and not by any
end users.
■
[T
3
K Touch Sensor Setting Program for Factory/Manufacturer]
y
Program : T
3
kCfgFE.exe
y
Operating System : Microsoft Windows XP (
32
&
64
bit), Vista (
32
&
64
bit),
7
(
32
&
64
bit)
y
Minimum Requirements : Intel Celeron Processor
333
MHz
Resolution
1024
x
768
!
Ø
Note
T
3
kCfgFE.exe file can be found in the CD in the package.
It is an exe. file and is not necessary to install.
All the configuration values are saved at the Sensor Control Board.
So, it is needed only for configuration and has no functions for sensor
operation.
Since all configuration values are saved at the Sensor Control Board, the
configuration values can be maintained even if your PC has to be replaced.
y
The setup of the T
3
k Touch Sensor can be accomplished after the installation is complete and should follow the
following process: "Sideview", "Detection", "Bent Adjustment", "Touch Setting."
Sensor
Installation
Sideview
Detection
Bent
Adjustment
Touch
Setting
<Sensor Setup Process>
1
.
1
. Program Features
y
Execute T
3
kCfgFE.exe file.
y
The program has an interface for Sensor Configuration, User Data Reset, and Firmware Information.
A
B
C
<T
3
kCfgFE Program Window>
A. Sensor Configuration
y
It is consisted of configurations button for each procedure. Set each procedure in the order provided.
B. Reset User Data
y
Reset the user data to the original factory data. (User related data for T
3
kCfg)
C. Firmware Information
y
The version information of the firmware and the model name of each camera and main module are presented.
OPE-11701
Innovative e-Board of New Conception
e-Board
