- 132 -
- 133 -
ST
AND UNIT
W
ALL UNIT
SCREEN C
ONFIG'
GRAPHIC C
ONFIG'
SENSOR C
ONFIG'
OPERA
TION
FRAME INS
TALL'
5
. Front glass installation
y
Prior to assemble the glass to the frame, clean the both surfaces of the glass with alcohol or glass cleaner.
y
Front and back side may be different for specially coated glasses. In such case, refer to the labels on the glass.
y
Lift the glass straightly upward without any inclination and insert it to the groove in the Frame bottom.
y
This work should be done by
2
or more people with suction cups.
y
The work must be done with extra care, because MPDP panels can be damaged if Frame Right bumps into
them.
VACUUM SUCTION CUPS
FRONT GLASS
TOP
Bottom
Caution
• MPDP panels can be damaged if the front glass crashes into them.
FRONT GLASS
Frame Bottom
Frame Bottom
5
.
1
. Slide the front glass toward the right end.
y
Slide the glass in the groove of Frame Bottom toward the vertical groove in the Frame Right.
y
The front glass must be supported with hands while slide toward Right end or it may be inclined to front side
and fall down.
M
8
*
10
The enclosed M
8
*
10
bolt must be fastened
with a washer.
Washer
Slide the glass into the vertical groove in
the aluminum frame for Frame Right.
75mm
75mm
50mm
50mm
75mm
75mm
50mm
50mm
OPE-11701
Innovative e-Board of New Conception
e-Board
