- 162 -
- 163 -
ST
AND UNIT
W
ALL UNIT
SCREEN C
ONFIG'
GRAPHIC C
ONFIG'
FRAME INS
TALL'
OPERA
TION
SENSOR C
ONFIG'
1
) Detecting Point A
y
When you touch the point A, the touch point of the sensor
1
and the sensor
2
will be recognized as a red bar as
shown in the graph below. The left red bar of the sensor
2
is the detection point for A.
<Detection Range Adjustment>
y
There can be more than
2
touch points. Select the touch point close to the center of the graph.
y
The range can be selected by clicking "-
500
", "-
100
", "+
100
", and "+
500
" buttons to move the red bar to the left
or right.
2
) Detecting Point B
y
When you touch the point B, the touch point of the sensor
1
and the sensor
2
will be recognized as a red bar as
shown in the graph below. The left red bar of the sensor
1
is the detection point for B.
y
Adjust the detection area in the same manner of the configuration method for A.
OPE-11701
Innovative e-Board of New Conception
e-Board
