- 160 -
- 161 -
ST
AND UNIT
W
ALL UNIT
SCREEN C
ONFIG'
GRAPHIC C
ONFIG'
FRAME INS
TALL'
OPERA
TION
SENSOR C
ONFIG'
3
.
2
. Detection Range
y
Setting the Detection Range is to eliminate from the angle of view of the camera those portions that are not
needed for touch.
3
.
2
.
1
. Automatic Setting
y
Detection range can be set automatically by pressing the Auto Range Setting button on the bottom of the
Detection Range.
<Auto Range Setting Button>
y
Touch the
4
corners on the screen A, B, C, and D where the red arrow indicates.
y
Touch the tip of the arrow
y
Touch the points when the red arrow appears and
move on to the other points after two beep sound.
Touch the four corners in the same manner.
<Auto Range Setting Example>
y
Detection range is saved automatically by touching
4
corners.
<Auto Range Setting Complete>
!
Note
Automatic range setting provides accurate detection range in general.
However, if it is not satisfactory or unable to use automatic range setting, you
can do it manually.
3
.
2
.
2
. Manual Setting
y
In case of the manual configuration for detection area, set the actual detection area by touching the
4
corners
of valid display area
A
D
B
C
OPE-11701
Innovative e-Board of New Conception
e-Board
