Oracle sparc M5-32, Руководство по установке

Страница: 20 / 182

10 SPARC M5-32 and SPARC M6-32 Servers Installation Guide • December 2014
Related Information
■
“Understanding the Firmware and Software Environment” on page 14
■
“Planning Network Addresses” on page 59
■
Server Administration , understanding the system architecture
SPs and SPPs
The two redundant SPs enable you to actively manage and monitor the components
in the server independent of the Oracle Solaris OS. The four SPPs off-load some of
the work from the two SPs. The SPs and SPPs work together to provide a single
management environment to all of the server components.
See “Front Components” on page 6 for the location of the SPs, and see “Rear
Components” on page 8 for the location of the SPPs.
Related Information
■
“Planning Network Addresses” on page 59
■
“Connecting the Front SP Cables” on page 97
■
“Connect Terminals or Emulators to the SP SER MGT Ports” on page 144
■
“Log In to the Active SP” on page 148
■
“Set Oracle ILOM Network Addresses” on page 150
■
“Power On the Server” on page 154
Domain Configurable Units
Domain configurable units (DCUs) are the hardware building blocks of PDomains. A
DCU includes one IOU, which contains internal drives, network connections through
the EMS modules, and 16 PCIe expansion slots. A DCU also contains 2 or 4 CMUs,
and each CMU contains 2 processors and 2 memory boards. The following
illustrations display the locations and components of DCUs.