Oracle sparc M5-32, Руководство по установке

Страница: 80 / 182

70 SPARC M5-32 and SPARC M6-32 Servers Installation Guide • December 2014
■
No. 2 Phillips screwdriver
■
T20 Torx screwdriver
■
13-mm wrench
■
17-mm wrench
■
19-mm wrench
■
Plastic tie-downs to secure cables
■
A tool to cut plastic strapping tape on the shipping container
■
Forklift, pallet jack, or trolley to move server to the unpacking area
■
3/16-inch (4.8-mm) A36 metal plate with beveled edges that is large enough to
bridge gaps in the floor
■
Eight 17-mm bolts and washers to secure the server to the floor (optional)
In addition, you must provide a system console device, such as one of the following:
■
ASCII terminal, workstation, or laptop
■
Terminal server
■
Patch panel connected to a terminal server
Related Information
■
“Installing the Server” on page 73
■
“Connecting the Front SP Cables” on page 97
■
“Connecting the Rear Power Cords and Data Cables” on page 119
■
“Powering On the Server for the First Time” on page 141
▼
Attach an Antistatic Wrist Strap
Always wear an antistatic wrist strap connected to a metal surface on the chassis
when you work on system components.
●
Attach an antistatic wrist strap to one of the ESD grounding jacks on the server.
There are four 4-mm ESD grounding jacks on the server, two on the front panel
and another on the rear panel.