Oracle sparc M5-32, Руководство по установке

Страница: 86 / 182

76 SPARC M5-32 and SPARC M6-32 Servers Installation Guide • December 2014
▼
Unpack the Server
Note – Remove the shipping container materials in a conditioned space away from
the final installation site to reduce the amount of airborne particles from entering the
data center.
1. Ensure that you have enough space to unpack the server safely.
See “Unpacking Area” on page 57 for more information.
2. Locate the unpacking instructions.
The unpacking instructions are attached to the outside of the shipping package.
3. Follow the unpacking instructions to unpack the server.
4. Save the mounting brackets and the 13-mm bolts that secured the server to the
shipping pallet.
You can use these mounting brackets, the eight 13-mm bolts that secured these
brackets to the server, and eight 17-mm bolts (which you supply) to secure the
server to the installation site floor.
Note – When unpacking the server, remove the kick plate to access the front
mounting brackets. Use a T20 Torx screwdriver to loosen the three captive screws
securing the kick plate to the server and then remove the kick plate.
Note – Before rolling the server down the ramps, make sure that the leveling feet are
raised completely. See “Raise the Leveling Feet” on page 89 for instructions.