User Manual – ePX 200
OptiPro Systems, LLC.
Page 44 of 60
Last Modified: 7/30/2014
M 38
B-AXIS OVERTRAVEL FAULT
M 44
SLURRY CHILLER TEMP OR FLOW FAULT
M 45
SLURRY CHILLER MOTORS RUN FAULT
M 59
SLURRY FLUID FLOW FAULT
M 60
COOLANT PUMP RUN FAULT
M 61
SLURRY PUMP RUN FAULT
M 62
CENTRIFUGE & RECIRC PUMPS RUN FAULT
M 63
COOLANT FLUID FLOW FAULT
M 65
B-AXIS REFERENCE SLOW FAULT
M 66
B-AXIS TIMEOUT CLAMPING/UNCLAMPING FAULT
M 107 S1 POLISHER SPINDLE NOT OK TO RUN FAULT
M 108 S1 POLISHER SPINDLE SPEED TIMEOUT FAULT
M 111 S2 WORK SPINDLE NOT OK TO RUN FAULT
M 112 S2 WORK SPINDLE SPEED TIMEOUT FAULT
Table 8-2: Status Messages
STATUS MESSAGES
M 1
INITIALIZING SERVOS
M 2
CLOSE FRONT DOOR TO CYCLE START MACHINE
M 3
CLOSE FRONT DOOR TO REFERENCE MACHINE
M 4
REFERENCE MACHINE
M 5
CYCLE START TO ZERO AXES
M 6
TOOL SPINDLE AIR BLAST ON
M 7
B-AXIS NOT REFERENCED
M 8
AUTO POWER-OFF ACTIVE
M 9
SERVOS TURNED OFF
M 56
S2/C-AXIS WORK SPINDLE NOT REFERENCED
M 64
B-AXIS CLAMPED
M 105
FEEDRATE OVERRIDE SET AT 0%
M 106
CLOSE DOOR AND RESET TO START SPINDLE
M 109
CYCLE START TO CHANGE TOOL
M 110
CYCLE START TO GO TO HOME
M 205
WAITING FOR POLISHER SPINDLE AT SPEED
M 206
WAITING FOR WORK SPINDLE AT SPEED
M 210
MOTION STOP ACTIVE
M 220
C-AXIS BRAKE DISABLED WHILE HAND WHEEL C-AXIS SELECTED
M 222
VACUUM ON NOT MONITORED
M 255
DOOR OPEN INTERLOCK OVERRIDE
M 256
DOOR OPEN INTERLOCK ACTIVE
