Keratron™ Installation and operating manual
OPTIKON 2000
Cod. 161501EN
9-11
2014-04-23
Rev.0
Figure 9-11: Setting the IP address for Keratron
™
Figure 9-12 shows an example of the subnet mask configuration.
NOTE:
The configuration parameters do not have default values. Therefore, it is advisable to
set the required values for all parameters
The existence of the network flow can be checked using field Status.
Figure 9-12: Setting the subnet mask
The
MAC Address
, which is also called physical address, is a 6 byte code that is
uniquely assigned to each wired or
wireless
network card. It is sometimes necessary
to provide this address to the network administrator to allow him to authorise the
