Keratron™
Installation and operating manual
OPTIKON 2000
Cod. 161501EN
6-3
2014-04-23
Rev.0
An external personal computer can be connected directly to the
Keratron™ using
the Ethernet LAN “
crossed
” cable provided, or an equivalent cable (see §9.4).
Alternatively, if the personal computer is already connected to a local network, the
Keratron™ can be implemented as additional ter minal (client) using a standard
LAN or
Wi-Fi
cable (see §9.5).
When the
Keratron™ and a PC or network are con nected by means of a LAN
cable, it is good practice
to use a network, PC, monitor and related
accessories
with class II insulation in accordance with standard EN60950 (represented by
symbol ), or that are in conformity with standard EN 60601-1; otherwise
connect the PC to a power outlet that is separate from the one to which the
Keratron™ is connected.
Whenever the
Keratron™ is connected to a PC or locale network for which it is not
known with certainty whether the previously cited standards are being observed, the
patient could be exposed to excessive dispersion currents (refer to section §3.3
Electrical warnings).
To make the wireless or cable connection efficient, the network parameters must be
configured. The procedure is described in sections §9.4 - §9.5.
