Keratron™ Installation and operating manual
OPTIKON 2000
Cod. 161501EN
9-7
2014-04-23
Rev.0
Figure 9-6: Network card protocols
The final window permits entry of the parameters necessary for communication. As
indicated in Figure 9-7, select (1)
Use the following IP address
and enter the
numbers shown in the Figure (2 and 3).
Figure 9-7: Configuration of the TCP/IP protocol
in Windows Vista/Windows 7
NOTE:
The configuration shown in Figure 9-
7 is compatible with the “Factory Default”
(factory settings) of
Keratron™.
The address must be selected following specific rules and not randomly.
The configuration should be changed under the supervision of a network
administrator.
