Keratron™ Installation and operating manual
OPTIKON 2000
Cod. 161501EN
7-1
2014-04-23
Rev.0
7
USING THE KERATRON™ HOME SCREEN
The
Keratron™ is turned on by placing the power switch (1 in Figure 5-1) in the “I”
position. After a few seconds the user will see the screen shown below in Figure 7-1
Figure 7-1: Keratron
™
initial screen
It shows i
n an intuitive manner not only all of the instrument’s measurement
functions, but also the configuration and accessories functions (Settings) and the
topography calibration functions (Calibration).
The
touch-screen
allows you to select the desired function by touching the screen
using the provided plastic
touch-pen
or another pen with a rounded plastic tip,
specifically designed for use with
touchscreens
.
NOTE: the use of another type of pen or instrument could irreversibly damage the
touchscreen
.
