Omron SYSMAC CQM1H Series, Руководство по программированию

Страница: 579 / 602

554
Glossary
bit number A number that indicates the location of a bit within a word. Bit 00 is the right-
most (least-significant) bit; bit 15 is the leftmost (most-significant) bit.
bit-control instruction An instruction that is used to control the status of an individual bit as opposed
to the status of an entire word.
block See logic block and instruction block .
building-block PC A PC that is constructed from individual components, or “building blocks.” With
building-block PCs, there is no one Unit that is independently identifiable as a
PC. The PC is rather a functional assembly of Units.
bus A communications path used to pass data between any of the Units connected
to it.
bus bar The line leading down the left and sometimes right side of a ladder diagram.
Instruction execution proceeds down the bus bar, which is the starting point for
all instruction lines.
byte A unit of data equivalent to 8 bits, i.e., half a word.
call A process by which instruction execution shifts from the main program to a
subroutine. The subroutine may be called by an instruction or by an interrupt.
Carry Flag A flag that is used with arithmetic operations to hold a carry from an addition or
multiplication operation, or to indicate that the result is negative in a subtraction
operation. The carry flag is also used with certain types of shift operations.
central processing unit A device that is capable of storing programs and data, and executing the in-
structions contained in the programs. In a PC System, the central processing
unit executes the program, processes I/O signals, communicates with external
devices, etc.
CH See word .
channel See word .
character code A numeric (usually binary) code used to represent an alphanumeric character.
checksum A sum transmitted with a data pack in communications. The checksum can be
recalculated from the received data to confirm that the data in the transmission
has not been corrupted.
clock pulse A pulse available at specific bits in memory for use in timing operations. Vari-
ous clock pulses are available with different pulse widths, and therefore differ-
ent frequencies.
clock pulse bit A bit in memory that supplies a pulse that can be used to time operations. Var-
ious clock pulse bits are available with different pulse widths, and therefore dif-
ferent frequencies.
common data Data that is stored in a memory of a PC and which is shared by other PCs in
the same system. Each PC has a specified section(s) of the area allocated to
it. Each PC writes to the section(s) allocated to it and reads the sections allo-
cated to the other PCs with which it shares the common data.
communications cable Cable used to transfer data between components of a control system and con-
forming to the RS-232C or RS-422 standards.
comparison instruction An instruction used to compare data at different locations in memory to deter-
mine the relationship between the data.
Completion Flag A flag used with a timer or counter that turns ON when the timer has timed out
or the counter has reached its set value.