![background image](http://html1.mh-extra.com/html/omron/scara-r6y-xc-series/scara-r6y-xc-series_user-manual_743986166.webp)
5-38
CHAPTER 5 Periodic Inspection
7) While placing a steel rod or similar tool through the 7mm diameter hole at
the lower part of the spline, loosen the U-nut at the top of the spline with
the wrench, and remove the bearing and bearing mount plate.
(See Fig. 5-29.)
Use a round steel rod with a diameter slightly smaller than 7mm. Avoid
using a square rod because the spline might be damaged by the edge of the
rod.
At this point, be careful to keep the spline shaft from coming off the spline
nut.
U-nut
Spline shaft
Spline nut
Fig. 5-29
8) Remove the bolts (M3×25L, 8 pieces) on the underside of the Y-axis arm
and remove the plate fastening the spline and the harmonic drive.
(See Fig. 5-30.)
M3
×
25
Fastening plate
Fig. 5-30
Содержание SCARA R6Y-XC Series
