![background image](http://html1.mh-extra.com/html/omron/scara-r6y-xc-series/scara-r6y-xc-series_user-manual_743986165.webp)
5-37
CHAPTER 5 Periodic Inspection
3. R-axis
1) Prepare the following tools and items.
• Harmonic grease 4B No.2
• Waste cloth (rag)
• Phillips-head screwdriver
• Hex wrench set
• Screw Lock (thread sealant)
• Torque-limiting wrench
• Hook wrench
• Replacement parts (See table below.)
Replacement parts
Parts name
Type No .
YAMAHA Parts No .
Note
Harmonic drive
Edge seal
SHF-17-50
KN4-M1821-000
Rubber wire diameter 1.78mm
´
Ring inner diameter 63.22mm KN4-M1896-000
Lower part of harmonic drive
Upper part of bellows (2 pieces)
O-ring
Rubber wire diameter 0.80mm
´
Ring inner diameter 45.40mm KN3-M257L-000
Supplied with harmonic drive
VR22A
KN4-M1886-000
Rubber wire diameter 1.78mm x Ring inner diameter 63.22mm
OMRON Parts No.
Rubber wire diameter 0.80mm x Ring inner diameter 45.40mm
2) Turn off the controller.
3) Place a sign indicating that the robot is being inspected, to keep others from
operating the controller switch.
4) Enter the safeguard enclosure.
5) Remove the Y-axis upper cover and bellows. Place the cover on the robot
base (pedestal) side with the machine harness still connected.
Refer to “7 Removing the Robot Covers” in Chapter 4 for removing and
reattaching the covers. Refer to “6 Replacing the bellows” in Chapter 5 for
removing and reattaching the bellows.
6) Remove the bolts (M5×16L, 4 pieces) securing the bearing to the upper end
of the spline and remove the spline and bearing from the holder. (See
Fig. 5-28.)
Holder
Bearing
M5
×
16
Spline shaft
Fig. 5-28
WARNING
THE Z-AXIS WILL SLIDE DOWN WHEN THE SPLINE MOUNTING BOLTS
(M5×16L, 4 PIECES) ARE REMOVED IN THE NEXT STEP, CAUSING A
HAZARDOUS SITUATION. PROP THE Z-AXIS WITH A SUPPORT STAND
BEFORE LOOSENING THESE BOLTS.
Содержание SCARA R6Y-XC Series
