124
SECTIO
N
6
ID
Se
ns
or Unit
O
p
era
tion
RFID System
User's Manual
SECTION 6
Controlling the ID Sensor Unit
Noise Measurement Command
1) Use the user program to set the storage words for noise measurement data and other parameters in
the Special I/O Unit Area.
2) Use the user program to turn ON the Command Execution Bit (CIO n, bit 00) in the Special I/O Unit
Area.
3) When the ID Sensor Unit detects that the Command Execution Bit has turned ON, it turns ON the ID
Busy Flag (CIO n+7, bit 00).
4) The ID Sensor Unit measures the noise around the Antenna, places the Results Information (CIO
n+8) and Processing Results Monitor information (word n+9) in the Special I/O Unit Area, places the
noise measurement results in the data storage words, turns OFF the ID Busy Flag (CIO n+7, bit 00),
and turns ON the Normal End Flag (CIO n+7, bit 01) for one scan.
5) Use the Results Information (CIO n+8), the Processing Results Monitor information (CIO n+9), and
noise measurement results in the data storage words in the user program only after the Normal End
Flag (CIO n+7, bit 01) turns ON.
(1)(2)
(4)
(4)
(4)
(3)(4)
Noise
measurement
results
Amplifier
Special I/O
Unit Area
CIO n+7
Data storage
area
CS/CJ-series CPU Unit
ID Sensor Unit
CIO n+8
to CIO n+9
CIO n to
CIO n+6
Содержание CJ1W-V680C11
