![background image](http://html1.mh-extra.com/html/omega/cl3001/cl3001_user-manual_737625053.webp)
9.6.2 Command Syntax
The following syntax rules apply to all of the remote commands.
Information about the syntax of response messages is also given.
a)
Parameter Syntax Rules
Table 7 lists the units accepted in command parameters
and used in responses. All commands and units may be
entered in upper or lower case.
Table 7 - Units Accepted in Parameters and Used in Responses
Units Meaning
uV
Volts in units of microvolts1
mV
Volts in units of millivolts1
V
Volts in units of volts
kV
Volts in units of kilovolts1
uA
Current in units of microamperes1
mA
Current in units of milliamps1
A
Current in units of amps
Ohm
Resistance in units of ohms
kOhm
Resistance in units of kilohms1
MOhm
Resistance in units of megohms1
cel
Temperature in degrees Celsius
far
Temperature in degrees Fahrenheit
psi
Pressure in pounds per square inch
mmHg
Pressure in millimeters of mercury at 0 °C
inHg
Pressure in inches of mercury at 0 °C
inH2O4C
Pressure in inches of water at 4 °C
inH2O20C
Pressure in inches of water at 20 °C
inH2O60F
Pressure in inches of water at 60 °F
cmH2O4C
Pressure in centimeters of water at 4 °C
cmH2O20C
Pressure in centimeters of water at 20 °C
mmH2O4C
Pressure in millimeters of water at 4 °C
mmH2O20C
Pressure in millimeters of water at 20 °C
bar
Pressure in bar
mbar
Pressure in millibar
kPa
Pressure in kilopascals
MPa
Pressure in megapascals
kg/cm2
Pressure in kilograms per square centimeter
1 Parameter only
49
Содержание CL3001
Страница 103: ......