![background image](http://html1.mh-extra.com/html/omega/cl3001/cl3001_user-manual_737625063.webp)
Output Commands
Command
Description
OPER
Activates the CL3001 output if it is in standby mode.
OPER?
Returns the operate/standby mode setting.
OUT
Sets the output of the CL3001.
OUT?
Returns the present output value of the CL3001.
RANGE?
Returns the present output range, for voltage and current
only.
RANGELCK
Locks the present output range, for voltage only.
RANGELCK?
Returns the RANGELOCK state, for voltage only.
STBY
Deactivates the CL3001 output if it is in operate mode.
Measurement Commands
Command
Description
ISO_MEAS
Sets the isolated input measurement type.
PRES?
Queries the attached pressure module for its
manufacturer and serial number.
PRES_MEAS
Changes the operating mode of the primary display to
pressure measurement.
RTD_MEAS
Changes the operating mode to RTD measurement.
TC_MEAS
Changes the operating mode to thermocouple
measurement.
VAL?
Returns the last values for the isolated and primary
measurements, in that order.
ZERO_MEAS
Zeros the pressure module, TC mV, or RTD ohms.
ZERO_MEAS?
Returns the zero offset for the pressure module, TC mV,
or RTD ohms.
RS-232 Operating Mode Commands
Command
Description
LOCAL
Puts the CL3001 into the local state and disables
lockout.
LOCKOUT
Puts the CL3001 into the lockout state. This command
duplicates the IEEE-488 LLO (Local Lockout) message.
REMOTE
Puts the CL3001 into the remote state. This command
duplicates the IEEE-488 REN (Remote Enable) message.
59
Содержание CL3001
Страница 103: ......