Omega CL3001 Скачать руководство пользователя страница 74

Страница: 74 / 104

Response:

Example:

*OPC?

This example does not respond until all pending
CL3001 operations are complete, and then returns
1.

OPER

IEEE-488

RS-232

Sequential

Overlapped

This command places the CL3001 in operate mode, activating the
output at front panel terminals. This command acts the same as
pressing the front panel key when in standby mode.

Parameter:

<None>

Response:

<None>

Example:

OPER

This example connects the selected output to the
CL3001 front panel terminals. It also indicates Opr
on the display.

OPER?

IEEE-488

RS-232

Sequential

Overlapped

This command returns the present operate/standby mode setting.

Parameter:

<None>

Response:

<value>
where <value> is "1" for operate mode and "0" for

standby mode

Example:

OPER?

This example indicates that the CL3001 is in

operate mode.

*OPT?

IEEE-488

RS-232

Sequential

Overlapped

This command returns a list of the installed hardware and software
options. This command is reserved for future use.

Parameter:

<None>

Response:

<text string>
where <text string> is "0" if no options are
installed, or a list of installed options separated by
commas

Содержание CL3001









































































































Результаты поиска

Содержание CL3001

Отзывы:

Omega CL3001, Руководство пользователя, Страница: 74 / 104

Результаты поиска

Содержание CL3001

Отзывы: