![background image](http://html1.mh-extra.com/html/omega/cl3001/cl3001_user-manual_737625041.webp)
1.
Disconnect any test leads from external devices.
2.
Select thermocouple input on the primary display as described
in section 4.7. Select the thermocouple type which corresponds
to the thermocouple being tested.
3.
Connect the thermocouple as shown in figure 25.
4.
Test the thermocouple per the manufacturer's instructions.
7.7
Thermocouple Transmitter
Figure 26 - Thermocouple Transmitter Application
1.
Disconnect any test leads from external devices.
2.
Select thermocouple output on the primary display as described
in section 4.8. Select the thermocouple type which corresponds
to the transmitter being tested.
3.
Select current input on the isolated display as described in
section 5.2. Select the isolated loop power option. If a HART
communicator is to be used for set up of the transmitter, select
the HART option.
4.
Connect the transmitter as shown in figure 26.
5.
Test and calibrate the transmitter per the manufacturer's
instructions.
37
Содержание CL3001
Страница 103: ......