![background image](http://html1.mh-extra.com/html/omega/cl3001/cl3001_user-manual_737625005.webp)
1. Introduction
The OMEGA CL3001 calibrator is an accurate full-featured
temperature, pressure and DC calibrator intended for R & D,
manufacturing and calibration lab applications. The unit's simple
design and ease of operation allow users to quickly familiarize
themselves with its operations and features. Time saving functions
like the ability to save, recall and automatically cycle through
setpoints for each output range, the ability to enter user definable
RTD curves, and a complete remote interface are several key
features offered by the CL3001.
1.1 Customer Service
OMEGA Engineering
Tel: (203) 359-1660
Fax: (203) 359-7900
www.omega.com
email: [email protected]
1.2 Standard Equipment
•
Power cord
•
Thermocouple shorting jumper
1.3 Options and Accessories
4 Wire PT100 RTD probe: P-M-1/10-1/8- 6 -0-P-3
Traceable certificate of calibration for RTD: Cal-3-RTD
Thermocouple extension cables: male mini connector to spade lug,
length is 2 ft. CL-300-CABLE-(*)-2
* Insert one thermocouple for CL-300-CABLE: J,K,T,E,R,S,B,N
Test leads: Black.red set, banana plug to banana plug [1 m L(3')]
TAC-CAB
1.4 Unpacking
Upon receipt of the shipment, inspect the container and equipment
for any signs of damage. Take particular note of any evidence of
rough handling in transit. Immediately report any damage to the
shipping agent.
NOTE: The carrier will not honor any claims unless all shipping
material is saved for their examination.
After examining and removing the contents, save the packing
material and carton in the event that re-shipment is necessary.
1
Содержание CL3001
Страница 103: ......