manualshive.com logo in svg

Olympus nortec 600, Руководство пользователя, Страница: 13 / 374

Поделиться
Скачать
Olympus nortec 600 Скачать руководство пользователя страница 13

DMTA-10040-01EN, Rev. E, February 2018

Labels and Symbols

3

The WEEE symbol indicates that the product must not be 
disposed of as unsorted municipal waste, but should be 
collected separately.

The regulatory compliance mark (RCM) label indicates that 
the product complies with all applicable standards, and has 
been registered with the Australian Communications and 
Media Authority (ACMA) for placement on the Australian 
market.

Seller and user shall be noticed that this equipment is suitable 
for electromagnetic equipment for office work (class A) and it 
can be used outside home. The MSIP code for the 
NORTEC 600 is the following: MSIP-REM-OYN-N600.

The CE marking is a declaration that this product conforms to 
all the applicable directives of the European Community. See 
the 

Declaration of Conformity

 for details. Contact your Olympus 

representative for more information.

The China RoHS mark indicates the product’s Environment-
Friendly Use Period (EFUP). The EFUP is defined as the 
number of years for which listed controlled substances will not 
leak or chemically deteriorate while in the product. The EFUP 
for the NORTEC 600 has been determined to be 15 years. 

Note

: 

The Environment-Friendly Use Period (EFUP) is not meant to 
be interpreted as the period assuring functionality and 
product performance.

Table 1  Content of the rating label 

(continued)

Содержание nortec 600























































































































































































































































































































































































Отзывы:

Нет отзывов